SAE 100R1 Construction: This hose shall consist of an inner tube of oil resistant synthetic rubber, a single steel wire braid reinforcement, and an oil and weather resistant synthetic rubber cover.
Low-permeation, premium hose for use on carbureted engines, PCV and EEC systems, and for fuel return hose on fuel injection systems. Not for use on the pressure-side of fuel injection systems. Approved for use with leaded and unleaded gasoline, diesel, bio …
Original Equipment Manufacturer From Australia | Gates
SAE – 100 R2 / EN 853 2SN / DIN 20022 2SN Specifiions. Conforming to Std. SAE – 100 R2. Construction
Hose that meets SAE 100R2-AT is reinforced with two steel wire braids for extra strength under pressure. Hose Meets SAE 100R1-AT Temperature Range: -40° to 210° F
EN853 1SN/SAE R1 AT. KEY PERFORMANCE. EN/DIN and new SAE rated working pressures. Appearance: Wrap( I.D less than 25.4mm smooth cover) Branding: Printing and indelible branding with eossed technology Colour: Black, red, blue, yellow, green, gray
Dimensions DN5 up to DN25 Working Pressures 8 MPa up to 27.5 MPa Temperature Range –50 °C up to +150 °C, +232 °C for WP up to 2 MPa Dimensions DN6 up to DN32 Working Pressures 3.4 MPa up to 17.2 MPa Temperature Range –70 ° C up to +232 °C (adjusted WP for Temp. > 120 °C) 2030T-##V70 – PTFE Smooth Bore Hose 2030T-##CON – Convoluted PTFE Hose
Class 25 hoses suit 250 bar WP Class 28 hoses suit 275 bar WP Class 35 hoses suit 350 bar WP Class 42 hoses suit 420 bar WP Class 45 hoses suit 450 bar WP 25, 29 C25, PC25 Isobaric 250 bar 26 PC28PS Isobaric 280 bar 27, 30 C35, PC35 Isobaric 350 bar 28, 31 C42, C42EH, PC42 Isobaric 420 bar 32 C45 Isobaric 450 bar Large bore medium pressure hose for
SAE 100 R12 Steel Wire Spiraled Hydraulic Hose with Alternating Direction Reinforcement. SAE 100 R12 steel wire spiraled hydraulic hose is suitable for delivering petroleum-based hydraulic oils and it is mainly used in high pressure working conditions. It is composed of three parts: tube, reinforcement and …
Silicone SAE J20R1 Class A radiator and coolant hose are rigid hoses used for routing mostly straight coolant and radiator lines in performance motors and vehicles, marine wet-exhaust systems, commercial truck and bus induction and cooling systems, agriculture and …
Fittings for this Hose: Use Standard/Braided Couplingsor W Series Couplingswith the SAE 100 R1S Hydraulic Hoses. Standard or Braided Couplingsare interchangeable to the U Style from Weatherhead. They are used to create a permanent and durable crimp that’s best for 1 wire and 2 wire hoses.
R1 hose is suitable for hydraulic fluids on mineral oil and synthetic oil basis (HL, HLP, HLPD, HVLP), oil-water-emulsions (HFAE, HFAS, HFB), water-glycol liquids (HFC), vegetable and mineral oil based lubricants, cooling water, and compressed air.
SAE 100 R1 steel wire reinforced hydraulic hose is suitable for m edium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100 R1 Type AT andperformance requirements of EN 853 1SN.. It can bear higher working pressure than other rubber hoses thanks to …
SAE 100R1 hydraulic hose for use with petroleum and water-based hydraulic fluids with temperatures from 140° to 100° C. Type A - an inner tube of oil-resistant synthetic rubber, a single wire braid reinforcement, and an oil- and weather-resistant synthetic rubber cover. A ply, or braid of appropriate material can be used over the inner tube or over the wire reinforcement (or both) anchoring
SAE 100R1AT single steel wire braided hose is a typical medium pressure hydraulic hose and strongly recommended for hydraulic lines or general industrial system. It can bear higher working pressure than other rubber hoses thanks to its high tensile braided steel wire reinforcement. It is composed of three parts: tube, reinforcement and cover.
SAE – 100 R1 / EN 853 1SN/ DIN 20022 1SN Specifiions. Conforming to Std. SAE – 100 R1. Construction
Jul 13, 2017· Parker Hose Products Division has a full line of hydraulic hoses designed for one-half SAE bend radius at full SAE pressure, which exceeds the minimum bend radius. For example, the bend radius of Parker’s 797 hydraulic hose is half of SAE’s 100R1, 100R2, 100R4, 100R12 and 100R13 minimum requirement, which reduces hose length requirements by
Hydraulic Rubber Hose SAE100 R2 . Hydraulic Hose Crimping Machine. SAE 100 R2 steel wire reinforced hydraulic hose is suitable for delivering petroleum-based hydraulic oils thanks to its oil resistant tube. Besides, it can convey the oils without producing excessive heat and leak.
Air Hose at Total Tools. 80+ stores nationwide & access to over 60,000 Tools online. Every Tool, Every Trade.
Hydraulic Hose SAE100 R1. Recommended For: hydraulic hose SAE100 R1 Medium pressure hydraulic lines. Meets or exceeds the requirements of SAE 100 R1 Type AT and performance requirements of EN 853 1SN. Appliion Fields: Mine hydraulic support,oilfield extraction machinery,mine / road / construction machinery Tube: Black,oil resistant,synthetic rubber Reinforcement: One braid of high …
Hose E-4 Hose Products Division Parker Hannifin Corporation Wickliffe, Ohio alog 4400 US Technical A B Fittings C Equipment D Accessories E Technical Hose Dash Size -04 -05 -06 -08 -10 -12 -16 -20 -24 -32 -40 -48
Browse Petroleum Hoses in the Kuriyama of America, Inc. alog including T600AA - Hard Wall Marine Exhaust Hose USCG/SAE J1527 A2/B2,T653AA - Soft Wall Marine Exhaust Hose - SAE J2006 R1,T605AA - 150 PSI Black Petroleum S&D Hose,T605AH - 150 PSI Red
When using SAE J517 hose for marine appliions, see SAE J1475, SAE J1942 and SAE J1942-1. The SAE J517 100R9, 100R10 and 100R11 hoses are discontinued due to lack of demand. For DOD orders see Appendix C. The SAE J517 100R1A, 100R2A, 100R2B and 100R 2BT are discontinued due to lack of demand. For DOD orders replace 100R1A with 100R1AT
Marine Diesel Wet Exhaust Hose according SAE J 2006 R1 and R2 Excellent resistance to seawater and wet exhaust gases UV- and ozone resistant Light weight with corrugated cover High tensile eedded steel spiral for excellent flexibility and small bend radii Approved by Lloyds Register of Shipping Certifie Nuer 02/00029
This SAE Standard provides ordering information for any SAE 20R1 through SAE 20R4 hose type (such as EC, HT, LT, or coination thereof.) It is a supplement for …
RYCO, an Australian company, has built a strong reputation since it commenced manufacturing hydraulic hose and fittings and other products in Melbourne, Australia over 70 years ago. Early clients like International Harvester and Massey Ferguson saw RYCO grow and expand its hydraulic product range.
SAE 100 R1AT Use: High pressure hydraulic oils, air and water.
sl. no. 1, 10, 11, 12, 13, 2, 3, 4, 5, 6, 7, 8, 9. part nuer: 04-r1, 05-r1, 06-r1, 08-r1, 10-r1, 12-r1, 16-r1, 20-r1, 24-r1, 32-r1. description: 1.1/2″ sae 100 r1
3/4" SAE 100-R1 SN 1-WIRE HYDRAULIC HOSE (164 feet) Cost per reel: $400.16 JR1-12 / 1500 psi. Select. 164 foot reels of Hydraulic Hose are available for purchase today. 1" SAE 100-R1 SN 1-WIRE HYDRAULIC HOSE (164 feet) Cost per reel: $449.36 JR1-16 / 1250 psi. Select. We offer 1" by the foot starting at $3.29 per foot.